Sign In Join

1993 Mazda Rx7

EMBED TO SHARE

Embed

EMBED TO SHARE

Embed

DETAILS

Factory Specifications:
1993 Mazda Rx7 Base Model 88xxx miles 10psi on 93 octane fuel tune around 550whp Weighs 2800 lbs
Performance Modifications:
All wiring has cleaned up of all unnecessary wiring and electronics and relocated all fuses and relays to rear hatch area along with battery relocation AEM infinity engine management with custom harness Eunos Cosmo 20B 3 rotor engine #756 with fresh rebuild all new seals large street-ported RA classic seals built by Nathan Jonard @ Rotary Automotive Every seal is brand new OEM clearance per Rotary Automotive specs for a turbo charged engine. Rotor housings are original. Resurfaced by ARP shop. Engine is dowel pressure modded per Carlos Lopez Jr. Recommendation. Rotor housings and front cover were painted with the same paint code as the car Custom idler pulley with Pineapple Racing pulley Custom thermostat neck Custom engine sub-frame designed to move the 20B back 3" and lower for better center of gravity modified 20B oil pan All intake manifolds, turbo intercooler and intercooler piping has been epoxy sealed and 2k coated satin black AEM smart coils mounted coil on plug with rice racing coil on plug adapters. AEM eugo wide-band setup with bosch sensor Bazai 2kw starter AEM and speedhut map sensors AEM and speedhut fuel pressure sensors Banzai racing billet pulleys Linder power systems inter-cooler couplers Custom top mount 304 stainless Exhaust manifold. 60mm Turbosmart wastegate open dump 4" exhaust to a Magnaflow oval race muffler to a HKS high power catback exhaust ACT Streetlight flywheel clutch- ACT hdd pressure plate and solid organic disc Turbosmart raceport BOV Borg Warner S480 turbo with large option exhaust wheel and .91 housing and race compressor cover AFE Air filter PTE turbo lava blanket and exhaust wrap Injector Dynamics 3x 2000cc secondary's 3x 1000cc primary's ready for 1000hp Walbro 485 primary pump with a stealth 340 secondary pump setup for 1000hp CJ Motorsports fuel pump hanger 1/2 inch tube fuel feed line All fuel vacuum and oil lines are all nylon braided earls with nylon safety strip and all name brand AN fittings Turbosmart fuel pressure regulator Custom Garrett V mount intercooler 18x12x4.5 core Custom Koyo V mount radiator to full width of the frame-rails Spal dial 14" low profile puller fans with standalone fan controller Dual 30 row Mocal oil coolers all 10an stainless hoses and an fittings All suspension components and sub-frames cleaned and repainted New urethane bushings and pillow-ball bushings Stoptech front and rear brake rotor kit with pads and ss brake lines All hard brake lines have been replaced with custom made stainless tube lines ABS removed Willwood brake proportioning valve Mazdatrix custom propeller shaft 1000whp rated Shortened PPF Turbo 2 differential Racing Beat front sway bar Custom Front sway bar mount Depowered steering rack
Interior Modifications:
S2000 OEM push style starter switch New custom ordered seat skins black with red stitching Efini steering wheel Fly rx7 tripple gauge pod HKS turbo timer Speedhut custom boost/vac, fuel pressure and wideband gauges Moroso Battery box located in rear hatch area Interior has been stripped of all unnecessary wiring and electronics all abs wiring has been deleted Floor has been fatmat sound deadened Brand new floor mats. Fuse blocks relocated to rear hatch area under carpet with easy access bar style fuses and led fail-safe mini fuses HKS turbo timer Non BOSE privacy cover Rotary13b1.com aluminum door handles Sakebomb garage passenger steel oh *FOAT* handle. Sakebomb garage passenger foot rest
Exterior Modifications:
2015 new paint- 2013 ford/mazda ingot silver base clear. FEED side-skirts Shine Auto low profile rear spoiler Brand new R1 oem front lip Brand new Shine Auto FEED style carbon fiber hood Efini converted Taillights Smoked marker lights with leds LED headlights
Tires, Wheels, and Suspension:
Fikse Profil 10 3 piece. 18x9.5 +33 18x10.5 +35 with custom center caps by Chips Motorsports 255/35r18F 295/30r18R Yokohama advan neova ad08r's Prototype stance Xr-1 coilovers custom valved for this car for Street and race 11k/11k swift springs
Audio, Video, and Technology:
Pioneer APP radio 4 head unit with DB audio speakers Gauge art CAN box display to head unit for all engine parameters
Special Thanks and Sponsors:
Nathan Jonard @ Rotary Automotive in Spokane, WA.
Awards:
Christina Erwin

TIME SLIPS

DYNO SHEETS


Loading...
#overlay-actions

Top